Evaporative coolers, commonly known as swamp coolers, are a great replacement for central air conditioning in dry, hot climates. The box-shaped cooling appliance saves money, lasts a long time, and uses little power. Evaporative cooling systems use water evaporation to reduce the air temperature, as opposed to the usage of refrigerants like those found in air conditioners. In addition, it raises the relative humidity of the air inside.
No matter how large or small the aperture is, dust and other pollutants can enter the duct system. The likelihood of experiencing symptoms like watery eyes and a runny nose increases as the concentration of these pollutants in the air rises. Avoid the buildup of excessive filth in your ducted system by having it professionally cleaned.
Besides annual maintenance inspections, homeowners should check the water level, refill the tank as needed, inspect the cooling pads and replace them if cracked or damaged, check and tighten any connections, and clean the outside of the unit.
Several indicators point to the necessity for evaporative cooling repairs Melbourne.
- Leakage
When the evaporative cooler begins leaking water, it strongly indicates that it has to be repaired. This occurs as a result of improper storage of the unit throughout the winter months. When the unit is not going to be used for a long period, it must be drained, the pads taken out, the tank cleaned, and the system well covered. The cause of the leak should be located and repaired by a trained specialist.
- Foul odor
A peculiar odor may be produced by the evaporative cooler if there is mold or water that has been stagnant. It can also happen if the unit has been left with water for an extended period without being maintained properly. You might want to think about calling in a professional as soon as possible so that they can figure out what the problem is and how to remedy it. Ignoring the problem or postponing repairs might result in significant damage being done to the evaporative cooler, which in turn poses a serious risk to one’s health.
- The evaporative cooler starts failing
When an evaporative cooler doesn’t turn on, you know there’s something wrong. The majority of the time, the problem is due to a blown fuse. An insufficient connection or a circuit breaker that has been tripped are two more prevalent causes of a system failure. A specialist in air conditioning repair can either replace the fuse or inspect the wiring to look for evidence of damage and determine the severity of the problem.
- Poor flow of air
Improper airflow is typically the most important indicator that an evaporative cooler has a problem that has to be addressed. Inadequate air circulation might be caused by obstructed exhaust vents, worn-out mechanical components, or both. To return the device to its previous level of functionality, a technician can remove the obstruction and replace any parts that have been damaged.
For servicing repairs click here.